10 things you should know about mold

The question of mold always comes up during a home inspection.  Prospective buyers always have a concern if there is any mold in the house, as was the case this week during a Huntington Home Inspection.  All was well until we inspected the boiler room.  The inside wall showed signs of mold growth...apparently from a previous water tank leak. 

So here are some mold basics.  First off, the key to mold control is moisture control. If mold is a problem in your home, you should clean up the mold promptly, and fix the water problem.  It is important to dry water damaged areas and items within 24-48 hours to prevent mold growth.  Wash mold off of hard surfaces with detergent and water and dry completely.

Ten Things You Should Know About Mold

1. Potential health effects and symptoms associated with mold exposures include allergic reactions, asthma, and other respiratory complaints.
2. There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture.
3. If mold is a problem in your home or school, you must clean up the mold and eliminate sources of moisture.
4. Fix the source of the water problem or leak to prevent mold growth.
5. Reduce indoor humidity (to 30-60%) to decrease mold growth by: venting bathrooms, dryers, and other moisture-generating sources to the outside; using air conditioners and de-humidifiers; increasing ventilation; and using exhaust fans whenever cooking, dishwashing, and cleaning.
6. Clean and dry any damp or wet building materials and furnishings within 24-48 hours to prevent mold growth.
7. Clean mold off hard surfaces with water and detergent, and dry completely. Absorbent materials such as ceiling tiles, that are moldy, may need to be replaced.
8. Prevent condensation: Reduce the potential for condensation on cold surfaces (i.e., windows, piping, exterior walls, roof, or floors) by adding insulation.
9. In areas where there is a perpetual moisture problem, do not install carpeting (i.e., by drinking fountains, by classroom sinks, or on concrete floors with leaks or frequent condensation).
10. Molds can be found almost anywhere; they can grow on virtually any substance, providing moisture is present. There are molds that can grow on wood, paper, carpet, and foods.

Mold is everywhere, but can be controlled to a certain degree. For more information on Mold, download this guide from the EPA.

If you have concerns about Mold, How's My House Home Inspections will perform an evaluation for you.  To schedule a home inspection, call us at 516-732-7595